Air to Air Hoses

Our three styles of charge air
connectors are designed to ease
connections in air intake system piping:
they compensate for slight
misalignment and isolate vibration
between hose connections. The silicone elastomer material resists chemicals, steam, ozone, coolants and aging conditions normally found in any engine operating environment.

All three charge air connectors are for installation on the pressure side with maximum operation temperatures up to 500°F (260°C.) They are orange in color to be easily identifiable as tolerant of high temperatures, and carry
a 1-year warranty.

Hump Hose Connectors

Inner Diameter in mm	Length in mm	Part Number
2.50 66	5.50 140	P532960
2.75 70	4.25 108	P532961
3.00 76	4.38 111	P532962

Use the illustration as a guide for installing your charge air connector.
For proper installation, use Donaldson Constant Torque clamps to
retain clamp load. Torque to 70-75 lbs-in.

Connectors/Sleeves

Inner Diameter in mm	Length in mm	Part Number
1.25 32	36.00 914	P532946
1.50 38	36.00 914	P532947
2.00 51	36.00 914	P532948
2.25 57	36.00 914	P532949
2.50 64	36.00 914	P532950
3.00 76	36.00 914	P532951
3.38 86	3.50 89	P532952
3.38 86	6.00 152	P532953
3.38 86	36.00 914	P532954
3.50 89	3.50 89	P532956
3.50 89	4.50 114	P532957
3.50 89	36.00 914	P532958
4.00 102	36.00 914	P532959

4-Ply Bellows

Inner Diameter in mm	Length in mm	No. of Rings	Part Number
3.50 89	6.00 152	3	P535572
4.00 102	6.00 152	0	P532943
4.00 102	6.00 152	2	P535571
4.00 102	6.00 152	3	P532944
4.00 102	7.50 191	3	P532945
4.00 102	8.00 203	3	P535573

Send mail to webfast@webfast.net with questions or comments about this web site. Website designer Lusk Enterprises Inc./WebFast Net

Send mail to webfast@webfast.net with questions or comments about this web site.
Website designer
Lusk Enterprises Inc./WebFast Net